Automatic Lubricators
Pulsarlube MS (60ml/ 125ml/ 250ml/ 500ml)
Pulsarlube MSP (60ml/125ml/ 250ml/500ml)
Pulsarlube BT (60ml/120ml/ 240ml)
Pulsarlube Mi (60ml/125ml/ 250ml)
Pulsarlube PLC (60ml/120ml/ 240ml/480ml)
The Pulsarlube MS electromechanical automatic grease lubricator is designed to operate in synchronization with the equipment on which it is installed. As long as the equipment is operating, the Pulsarlube MS will dispense the preset amount of lubricant so that any loss or waste of lubricant can be prevented. If the equipment is not operating, then the Pulsarlube MS goes into “stand-by mode” and does not dispense lubricant until the machine goes back into operation.
The Pulsarlube MSP electromechanical automatic grease lubricator is designed to operate in synchronization with the equipment on which it is installed. As long as the equipment is operating, the Pulsarlube MSP will dispense the preset amount of lubricant so that any loss or waste of lubricant can be prevented. Unlike the Pulsarlube MS, this product is a machine synchronized, externally powered unit and the power supply connected to the machine or PLC powers the unit. It is not necessary to replace the battery pack in the unit up to 5 years but the grease pouch should still be replaced after completion of each lubrication cycle set.
The Pulsarlube BT is a Bluetooth-enabled automatic lubricator that could be monitored and controlled by a mobile devices in near field (5~20m) without access to lubricators.
The Pulsarlube Mi automatic grease lubricator is innovatively designed to detect the operation of industrial rotational machinery by using a piezoelectric vibration sensor. This piezoelectric sensor is composed of a ceramic strain transducer attached to a metallic proof mass in order to respond to an externally imposed acceleration. The Pulsarlube Mi periodically checks the operating status of the machinery which it is attached to.
The Pulsarlube PLC electromechanical automatic grease lubricator is specially designed to be fully integrated as well as be synchronized to a PLC system .Kindly offers two types of PLC lubricator, Month and Interval type for wider range of usage.
